Question- Railway Bridge

1➤ Weep holes are provided in

2➤ Pipe culvert is a/an

3➤ IS code for Steel structure is

4➤ The height gauge needs to be provided in

5➤ The minimum vertical clearance in RUB in urban areas where double decker buses p

6➤ The minimum vertical clearance above R.L. to bottom of ROB near the yard shall b

7➤ Steel channel sleepers are provided in bridges with superstructure of

8➤ The guard rail is provided in bridges to

9➤ The level of guard rail in bridges shall not be lower than that of running rail

10➤ The horizontal clearance between guard rail and running rail in BG track is

11➤ Minimum length of steel channel sleeper in BG

12➤ Corrosion in Steel girder bridges may be prevented by

13➤ Rail joints should be avoided within .......... of a bridge abutment.

14➤ Length of guard rails to be bent so as to be brought together at the middle of

15➤ Rebuilding of Railway bridges can be done by providing

16➤ Foundation and substructure of the bridge should be inspected by SSE/P-way/work

17➤ ORN stands for in the Numerical Ration System is

18➤ URN stands for in the Numerical Rating System is

19➤ For a major bridge, the URN would comprise of

20➤ In case of LWR track, full ballast section as specified in LWR Manual should be

21➤ For Box Culverts, Danger level is to be taken as

22➤ Periodicity of Underwater inspection for identified bridges

23➤ Flood level gauge to be marked in

24➤ Rail Cluster, as temporary arrangement is generally used up to a span of

25➤ The minimum vertical clearance of foot over bridge gangway is

Your score is

2 Comments

  1. periodicity of under water inspection of bridges should be 02 year as per my knowlwdge.

    ReplyDelete
  2. 100 question in place of 25 in one group suitable for preparation

    ReplyDelete

Don’t hesitate to reach out with the comment above. Your email address will not be published.